kenton
 …the MIDI specialists
MIDI solutions you can trust
 
Find us on Facebook & YouTube

Kenton on Facebook  Kenton Videos on YouTube
"...the MIDI USB Host arrived as promised ... very simple to connect up and (as expected) worked exactly as it says on the tin..."

"...I've installed one Kenton Retrofit for Korg PS3200 to 3200 a few years ago, I had no word other than "AMAZING" ..."

"... thank you very much for your fast and very efficient service you provided in delivering my product. I will definitely recommend your company to my music friends..."

   
Kenton Leads. A range of leads for connecting to Kenton equipment.

midi leads   Kenton 1 x 5 pin DIN plug to 2 x 3.5mm jack plug (for solo to tb303
(pins 1 & 3 connect to the jacks)
 
ex VAT
inc VAT
Qty       
  This lead has two intended uses:  
£6.30
£7.56
  1 - with a Pro-SOLO mkII
the DIN plug end will plug into the THRU socket (set to Aux mode) to access aux outputs 2 & 3, which are intended to be used to drive the accent and slide inputs of a TB-303 which has been fitted with a Kenton 5 Socket upgrade.
2 - with a Pro-SOLO mk1
the 3.5mm jack plugs will plug into the CV & Gate outputs of the Pro-SOLO used in sync mode, the DIN plug can then be plugged into any Sync 24 input on equipment )
       
 
midi leads   Kenton 8 pin mini-Din to 14 pin IEEE DCB cable for ProDCB  
ex VAT
inc VAT
Qty       
 

8 pin mini DIN plug to 14 pin IEEE DCB cable - 2 metres.

 
£14.70
£17.64
  Used for connecting a PRO-DCB or optional Pro-2000 DCB port to a Juno 60 or to a Jupiter 8 which has the 14 pin IEEE connector
(some JP8s have a 20 pin connector).
N.B. This cable is supplied free with a PRO-DCB or optional Pro-2000 DCB port unless the 20 pin version is requested
       
 
midi leads   Kenton 8 pin mini-Din to 20 pin plug DCB cable for ProDCB  
ex VAT
inc VAT
Qty       
 

8 pin mini DIN plug to 20 pin flat (OP8) DCB cable - 2 metres.

 
£26.25
£31.50
  Used for connecting a PRO-DCB or optional Pro-2000 DCB port to a Juno 60 or to a Jupiter 8 which has the 20 pin flat connector
(some JP8s have a 14 pin IEEE connector).
N.B. This cable is supplied free with a PRO-DCB or optional Pro-2000 DCB port if requested at time of ordering, otherwise the 14 pin version is automatically supplied
       
 
midi leads   Kenton 15 pin D to 14 pin IEEE DCB cable (for PRO-4 only)  
ex VAT
inc VAT
Qty       
  15 pin D plug to 14 pin IEEE DCB cable - 2 metres.
 
£26.25
£31.50
  Used for connecting PRO-4 DCB port to a Juno 60 or to a Jupiter 8 which has the 14 pin IEEE connector (some have a 20 pin connector).        
 
midi leads   Kenton 15 pin D to 20 pin plug DCB cable (for PRO-4 only  
ex VAT
inc VAT
Qty       
  15 pin D plug to 20 pin flat DCB cable - 2 metres.  
£37.80
£45.36
  Used for connecting PRO-4 DCB port to a Jupiter 8 which has
the 20 pin flat (OP8) connector (some have a 14 pin IEEE connector).
       
 
midi leads   Kenton Kadi cable for use with Pro Kadi / Pro2000 / Pro4  
ex VAT
inc VAT
Qty       
 

KADI cable 15 pin high density D plug to 15 pin high density D
plug.

 
£21.00
£25.20
  Used for connecting the KADI port of a Pro-KADI, Pro-2000
or Pro-4 to any piece of equipment which has been fitted with a KADI socket.
Note: this cable is included free with a Pro-KADI or Pro-2000 optional KADI port - unless a Wasp cable is specified at time of ordering. (It is/was not supplied with a Pro-4).
       
 
midi leads   Kenton Wasp cable for use with Pro Kadi / Pro2000 / Pro4  
ex VAT
inc VAT
Qty       
 

Wasp cable 15 pin high density D plug to 7 pin DIN plug.

 
£26.25
£31.50
  Used for connecting the KADI port of a Pro-KADI, Pro-2000 or Pro-4 to a Wasp or Gnat synthesiser.
Note: this cable is included free with a Pro-KADI or Pro-2000 optional KADI port - if specified at time of ordering.
(It is/was not supplied with a Pro-4).
       
 
   
Cookie Policy Page top View Basket Home