kenton
 …the MIDI specialists
MIDI solutions you can trust
 
Find us on Facebook & YouTube

Kenton on Facebook  Kenton Videos on YouTube
"...the MIDI USB Host arrived as promised ... very simple to connect up and (as expected) worked exactly as it says on the tin..."

"...I've installed one Kenton Retrofit for Korg PS3200 to 3200 a few years ago, I had no word other than "AMAZING" ..."

"... thank you very much for your fast and very efficient service you provided in delivering my product. I will definitely recommend your company to my music friends..."

   

 

Socket Upgrade Kit for:

JEN SX-1000

Available with either Hz/Volt or Volt/Oct CV input

This socket upgrade kit is built to order after your payment has been processed. It then takes us up to 10 working days to build and test the kit before we can despatch it.

PLEASE NOTE: Fitting a socket upgrade kit is a skilled job which should be undertaken only by an experienced synth service engineer or fitted by us at our premises in South West London.


JEN SX1000 (add Hz/Volt CV input)

  • kenton socket kit

  • Kit to add CV / Gate / Filter sockets to the SX-1000. This is the Hz/V version of the kit, meaning that the CV input of the kit is Hz/V. This version of the kit is suitable for use with all current models of Kenton converter and is a little cheaper than the Volt per Octave version. If you are planning to use this with a Pro-4 or Pro-2, or a converter by another manufacturer, check that it has the ability to give a CV output with Hz/V scaling.

    When used in conjunction with one of our MIDI to CV converters, such as the Pro-Solo mkII, USB-Solo or Pro-2000 mkII, these three additional sockets will enable the synth to be played from a MIDI keyboard or MIDI sequencer.

    The inputs are on 3.5mm mono jack sockets which provide the following control:
    CV - provides Hz/V control over the oscillator frequency
    Gate - controls when notes play (0 volts = note off / >3 volts = note on)
    Filter - controls the cutoff frequency of the low pass filter (from aux out of converter)

    The kit contains a circuit board, and all necessary components and diagrams for connecting the wires / components, and mounting the three 3.5mm mono jack sockets and switch.

    Used with a Pro-Solo mkII or Pro-2000 mkII this kit will give you the following control over the synth from a suitable MIDI keyboard or sequencer:

    Notes - at least 5 octaves range - (this is not limited by the kit or converter, but by the synth itself)
    Pitchbend - range can be set in the converter
    Modulation - from converter's inbuilt LFO. Speed and waveshape can be changed in real time.
    Portamento (slide) - rate can be changed in real time.
    Filter cutoff frequency - can be controlled using any continuous MIDI controller (cc) or other MIDI message such as Aftertouch or Velocity
    Low / High / Recent note priority - can be set in the converter
    Single / Multiple note trigger modes - can be set in the converter

    See the specifications of the Pro-Solo mkII, USB-Solo or Pro-2000 mkIII for further features.



JEN SX1000 ( adds Volt/Oct CV input)

  • kenton socket kit

  • Kit to add CV / Gate / Filter sockets to the SX-1000. This is the Volt per Octave version of the kit, meaning that the CV input of the kit is Volt per Octave. Another version of the kit is available with Hz/V input which is suitable for use with all current models of Kenton converter and is a little cheaper than this version.

    When used in conjunction with one of our MIDI to CV converters, such as the Pro-Solo mkII, USB-Solo or Pro-2000 mkII, these three additional sockets will enable the synth to be played from a MIDI keyboard or MIDI sequencer.

    The inputs are on 3.5mm mono jack sockets which provide the following control:
    CV - provides Volt per Octave control over the oscillator frequency
    Gate - controls when notes play (0 volts = note off / >3 volts = note on)
    Filter - controls the cutoff frequency of the low pass filter (from aux out of converter)

    The kit contains a circuit board, and all necessary components and diagrams for connecting the wires / components, and mounting the three 3.5mm mono jack sockets and switch.

    Used with a Pro-Solo mkII or Pro-2000 mkII this kit will give you the following control over the synth from a suitable MIDI keyboard or sequencer:

    Notes - at least 5 octaves range - (this is not limited by the kit or converter, but by the synth itself)
    Pitchbend - range can be set in the converter
    Modulation - from converter's inbuilt LFO. Speed and waveshape can be changed in real time.
    Portamento (slide) - rate can be changed in real time.
    Filter cutoff frequency - can be controlled using any continuous MIDI controller (cc) or other MIDI message such as Aftertouch or Velocity
    Low / High / Recent note priority - can be set in the converter
    Single / Multiple note trigger modes - can be set in the converter

    See the specifications of the Pro-Solo mkII, USB-Solo or Pro-2000 mkII for further features.


Download the manual

For earlier versions and other manuals click here

 

 

Related Items

       
     
  Kenton PRO-SOLO MkII Midi to CV Converter
       
  pro2000 Kenton PRO-2000 MkII Midi to CV Converter
       
  usb-solo front Kenton USB-SOLO MkII Midi to CV Converter

 


More information


What is MIDI to CV?

Solving MIDI Clock Problems

FAQ's

How to connect using our MIDI to CV Converters


socket upgrade      
ex VAT
inc VAT
Qty       
  Jen SX1000 Hz/V / gate / filter kit (Hz/V)
Kit Only - should be fitted by competent synth service engineer
 
£75.00
£90.00
         
 
socket upgrade   Jen SX1000 Hz/V / gate / filter kit (Hz/V)  
ex VAT
inc VAT
Qty       
  Kit including fitting by expert engineers at our premises in London. Note however that delivery to and from Kenton is not included in these prices.  
£135.00
£162.00
         
 
socket upgrade      
ex VAT
inc VAT
Qty       
  Jen SX1000 CV / gate / filter kit (Volt/Oct)
Kit Only - should be fitted by competent synth service engineer
 
£105.00
£126.00
         
 
socket upgrade   Jen SX1000 CV / gate / filter kit (Volt/Oct)  
ex VAT
inc VAT
Qty       
  Kit including fitting by expert engineers at our premises in London. Note however that delivery to and from Kenton is not included in these prices.  
£165.00
£198.00
         
 
   
Cookie Policy Page top View Basket Home