Retrofit Kit for:

Roland Vocoder VP330 MkI (Rocker Switches) & Mk2 (LED's)

Whilst the functions provided for the VP330 Mk1 and VP330 Mk2 are identical there are internal wiring differences.
Please be sure to order the correct kit for your VP330.
To help you to identify the model that you own, the Mk1 has ROCKER SWITCHES  and the MK2 has LED SWITCHES.

PLEASE NOTE: Fitting a retrofit kit is a skilled job which should be undertaken only by a competent syynth service engineer or fitted by us at our premises in South London.

Retrofit Kit VP330 Mk1

• 
• 
  

  This retrofit kit for the Roland Vocoder Plus VP-330 adds the following MIDI control:

  For incoming MIDI:
  Any MIDI channel can be selected
  Notes (MIDI note numbers 36 - 84) - transpose possible
  Pitchbend - bends down only, same as the pitch shift slider control on the synth (range dependent on setting of pitch set control)
  
  This retrofit is intended to allow the synth to be played from a MIDI master keyboard or sequencer.

  Hardware:
  MIDI In & Thru sockets
  Push button (for programming the MIDI setup)
  Setups are stored in non-volatile memory (Eeprom)

  The kit comprises the following items:
  Circuit board - fits in the base of the Vocoder (with mounting bracket)
  Small pack - contains DIN sockets and mounting hardware
  Large pack - contains cable assemblies
  User instructions - How to change from default settings and general instructions
  Fitting instructions - step by step fitting guide plus diagrams of where to connect what

  All kits are fully checked and tested before despatch

  Note: Our retrofit kits are not intended for installation by the end user. They should always be fitted by an experienced synth engineer.

  
  

Retrofit Kit VP330 Mk2

• 
• 
  

  This retrofit kit for the Roland Vocoder Plus VP-330 adds the following MIDI control:

  For incoming MIDI:
  Any MIDI channel can be selected
  Notes (MIDI note numbers 36 - 84) - transpose possible
  Pitchbend - bends down only, same as the pitch shift slider control on the synth (range dependent on setting of pitch set control)
  
  This retrofit is intended to allow the synth to be played from a MIDI master keyboard or sequencer.

  Hardware:
  MIDI In & Thru sockets
  Push button (for programming the MIDI setup)
  Setups are stored in non-volatile memory (Eeprom)

  The kit comprises the following items:
  Circuit board - fits in the base of the Vocoder (with mounting bracket)
  Small pack - contains DIN sockets and mounting hardware
  Large pack - contains cable assemblies
  User instructions - How to change from default settings and general instructions
  Fitting instructions - step by step fitting guide plus diagrams of where to connect what

  All kits are fully checked and tested before despatch

  Note: Our retrofit kits are not intended for installation by the end user. They should always be fitted by an experienced synth engineer.

  
  

Download the manual

Roland VP330 Manual

Related Items

More Information

General information can be found HERE