Use it with a CV converter such as the Pro-Solo mkII or Pro-2000 mkII
On both models, the default setup is for an SH-101 (V/Oct mode and 5V Gate)
Connect the CV out of the converter to the CV In of the SH-101
Connect the Gate out of the converter to the Gate In of the SH-101
This provides a quite comprehensive amount of control. Notes, pitchbend, modulation, portamento - see the converter pages for more information.

Pro-Solo mkII converter

Pro-2000 mkII converter

3.5mm to 3.5mm jack leads - you will need 2 (first 3 items on this page)

Fit a filter input (VCF) socket

You can fit a filter input (VCF) socket which will allow you to use the above converters to control the filter cutoff frequency. You will need an additional jack lead if you do this.

Click here for details

Clock the internal arpeggiator

You can clock the internal arpeggiator of the SH-101 using the clock output of a Pro-2000 mkII or the Aux output of a Pro-Solo mkII (set to clock). For this you will need a 3.5mm to 6.35mm jack lead. Note that you can only arpeggiate notes played on the keyboard of the SH-101. Anything plugged into the CV/Gate inputs overrides the internal arpeggiator.

Click here for 3.5mm to 6.35mm jack leads

Fit a filter & modulation kit

We also supply a filter & modulation kit for the SH-101 so that owners of the old Pro-2 model can control modulation as well as filter/VCF. You don't need this variation of the kit if you have a Pro-Solo, Pro-2000 or Pro-4 as these all have modulation built-in.

Click here for the details of the kit